MCK-65
Hard Rock Crushing and Screening Plant
Technical Information
| Production Capacity | 60–80 Tons/Hour |
| Maximum Feed Rate | 380 mm |
| Jaw Crusher Feed Opening | 600×400 mm |
| Cone Crusher Model | CC-100 |
| Vibrating Screen Dimensions | 1300×4000 mm |
| Total Engine Power | 190 kW |
| Generator *Optional | 300 kVA |
| Separator Belt *Optional | 650 mm |
| Shipping Dimensions | Length: 20,000 mm Width: 3,800 mm Height: 4,500 mm |
MCK-65 Semi-Mobile Hard Rock Crushing and Screening Plant
MCK-65 The Semi-Mobile Crushing and Screening Plant is a compact solution that combines jaw and cone crushing technologies on a single chassis, with a production capacity of 60–80 Tons/Hour. The process begins with a jaw crusher featuring a maximum feed capacity of 380 mm, where the material is initially crushed. The material exiting the jaw crusher is then transferred to a vibrating screen measuring 1300 x 4000 mm. The vibrating screen separates the crushed material into different fractions and directs the appropriately sized products to the stockpile conveyors. The coarse material remaining on the upper deck of the screen, however, CC-100 It is fed into the cone crusher. The material, which is crushed again in the cone crusher, is then sent back to the vibrating screen for classification. Thus, the process of reducing the material’s size with the jaw crusher in the first stage, followed by its classification on the screen, and the re-crushing of the coarse material remaining on the screen using the cone crusher—and its subsequent re-screening—is all carried out on a single frame.
Feeding BunkerThe ability to adjust the capacity of the cone crusher based on the project and customer needs, and to manually control the feed rate, allows production to be adapted to on-site conditions. Directing only the coarse material remaining on the vibrating screen to the cone crusher ensures a controlled crushing process, while the ability to select the vibrating screen mesh according to the final product requirements enables the production of different product fractions.
Features
- Wide Range of Feeding Options
Feeding bunkers can be loaded using excavators, trucks, and loaders. This design provides operational flexibility in construction site and quarry applications where different loading equipment is used. - Flexible Feeding Bunker Design
Feeding Bunker The capacity can be determined based on the capacity required in accordance with the machine’s current design. - Controlled Feeding System
Thanks to the manual speed control on the feeder, the amount of material fed into the crusher can be adjusted according to operating conditions and production needs. - Hydraulic System
Conveyor belts and hopper hatches can be easily folded and unfolded using the hydraulic system. This design allows for the rapid transportation and installation of the semi-mobile crushing and screening plant without the need for a crane. *Optional - Front Flap
In applications requiring the production of a single product type, the optional front flap located in front of the screen feed belt prevents the material from being transferred to the vibrating screen, allowing the product to be directed directly to the front storage belt. *Optional - Transportation with a Single Tractor-Trailer
Thanks to its semi-mobile design, all of the facility’s equipment can be transported using a tow truck. This feature helps streamline logistics operations between different work sites. - Easy Maintenance and Lubrication
Thanks to the manual grease fitting points, periodic lubrication of moving components can be easily performed.
An automatic lubrication unit can be installed to extend maintenance intervals. *Optional - Precise Final Product Adjustment
– Jaw Crusher Discharge Opening: The outlet opening of the jaw crusher can be adjusted manually and can be adjusted quickly and easily using the optional hydraulic adjustment system.
– Cone Crusher Discharge Opening: The discharge opening of the cone crusher can be adjusted quickly and easily using a manual hydraulic adjustment system.
– Automatic Final Product Size Adjustment: For both crushers, the crushing gap can be automatically adjusted based on the value entered into the automation system. This allows for quick and precise control of the final product size. *Optional - Vibrating Screen
The mesh type and mesh spacing of the vibrating screen, which separates broken materials into different fractions, can be customized according to customer specifications. - Braked Axle System
A braked axle system is used to ensure that the semi-mobile crushing and screening plant can be transported safely. - Low-Maintenance Platforms
Thanks to maintenance platforms that facilitate access to areas requiring maintenance, service and inspection procedures can be carried out more safely and conveniently. *Optional - Fully Automatic Automation System
The PLC-based automation system can be managed via an HMI touchscreen panel and remote tablet control. This allows for centralized monitoring of the crushing and screening process. - Generator System
Thanks to the generator system, the facility can be powered by diesel fuel at construction sites where there is no electrical infrastructure. *Optional - Windshifter Technology
The Windshifter, which can be positioned along a long return conveyor, helps separate unwanted lightweight materials from the material on the screen using an airflow. This improves the cleanliness of the final product. *Optional - Minimum Infrastructure Requirements
Thanks to its semi-mobile design, the facility requires minimal infrastructure for installation. The necessary technical information and guidance are provided during the installation process.
Documents
×
Get a Quote Now
MCK-65 It ensures controlled product manufacturing even in challenging construction sites. Contact us for a solution and price quote tailored to your project.