PRO-130
Semi-Mobile Crushing and Screening Plant
Technical Information
| Production Capacity | 180–250 Tons/Hour |
| Maximum Feed Rate | 500 mm |
| Impact Crusher Rotor Size | Ø 1190 x 1285 mm |
| Vibrating Screen Dimensions | 1800×5500 mm |
| Total Engine Power | 320 kW |
| Generator *Optional | 630 kVA |
| Separator Belt *Optional | 1000 mm |
| Crusher Feeder *Optional | 2600×1350 mm |
| Sieve *Optional | 1070×1790 mm |
| Shipping Dimensions | Length: 20,500 mm Width: 4,400 mm Height: 4,500 mm |
PRO-130 Semi-Mobile Crushing and Screening Plant
PRO-130 The Semi-Mobile Crushing and Screening Plant is designed for projects requiring high-volume production, with a production capacity of 180–250 Tons/Hour. The impact crusher, featuring a Ø1190 x 1285 mm rotor and a maximum feed size of 500 mm, enables the continuous processing of large volumes of material. The 1800 x 5500 mm vibrating screen separates the crushed material into different fractions, and the screen mesh sizes and mesh type can be selected according to the final product requirements.
Manual lubrication points simplify daily maintenance procedures, while the optional automatic lubrication system helps optimize maintenance intervals. The semi-mobile crushing and screening plant’s design—which allows it to be transported with a single tractor and requires minimal infrastructure—increases flexibility in use across different sites compared to a stationary plant.
Features
- Wide Range of Feeding Options
Feeding Bunker It is designed to be fed by excavators, trucks, and loaders. This allows it to easily adapt to various construction site and quarry operating conditions. - Flexible Feeding Bunker Design
Feeding Bunker Capacity can be determined based on the required capacity in accordance with the machine’s current design. - Controlled Feeding System
Thanks to the manual speed control on the feeder, the amount of material fed into the crusher can be adjusted according to operating conditions and production needs. - The Benefits of a Wobbler Feeder
Wobbler feeder, Feeding BunkerIt helps separate mud, clay, and unwanted fine materials from the material before it is fed into the crusher. This reduces the amount of unwanted materials in the product, resulting in a higher-quality final product. *It can be used in WF configurations. - Hydraulic System
Conveyor belts and hopper hatches can be easily folded and unfolded using the hydraulic system. This design allows for the rapid transportation and installation of the semi-mobile crushing and screening plant without the need for a crane. *Optional - Front Flap
In applications requiring the production of a single product type, the optional front flap located in front of the screen feed belt prevents the material from being transferred to the vibrating screen, allowing the product to be directed directly to the front storage belt. *Optional - Transportation with a Single Truck Head
Thanks to its semi-mobile design, all of the facility’s equipment can be transported using a tow truck. This feature helps streamline logistics operations between different work sites. - Easy Maintenance and Lubrication
The manual grease fitting points on the semi-mobile crushing and screening plant make it easy to perform periodic lubrication of moving components.
An automatic lubrication unit can be installed to extend maintenance intervals and reduce operator intervention. *Optional - Precise Final Product Adjustment
The distance between the hammers of an impact crusher and the rotor blades can be manually adjusted using a hydraulic system as standard.
In addition, the pendulum distance is automatically adjusted based on the value entered into the automation system, allowing for quick and precise control of the final product size. *Optional - Vibrating Screen
In vibrating screens, which enable the production of products in different fractions, the type of screen mesh and the mesh spacing can be determined according to customer needs. - Braked Axle System
A braked axle system is used to ensure that the semi-mobile crushing and screening plant can be transported safely. - Low-Maintenance Platforms
Thanks to maintenance platforms that facilitate access to areas requiring maintenance, service and inspection procedures can be carried out more safely and conveniently. *Optional - Fully Automatic Automation System
The PLC-based automation system can be managed via an HMI touchscreen panel and remote tablet control. This allows for centralized monitoring of the crushing and screening process. - Generator System
Thanks to the generator system, the facility can be powered by diesel fuel at construction sites where there is no electrical infrastructure. *Optional - Windshifter Technology
The Windshifter, which can be positioned along a long return conveyor, helps separate unwanted lightweight materials from the material on the screen using an airflow. This improves the cleanliness of the final product. *Optional - Minimum Infrastructure Requirements
Thanks to its semi-mobile design, the facility requires minimal infrastructure for installation. The necessary technical information and guidance are provided during the installation process.
Technical Specifications
| Body Protection Liner: | ST52 *Standard /Wear-Resistant 450 HBW Plate *Optional |
| Bunker Width: | 5100 mm |
| Standard Feed Height (10 m³): | 4550 mm |
| Optional Feed Height (18 m³): | 5240 mm |
| Feeder Width: | 1050 mm |
| Body Protection Liner: | Wear-Resistant 450 HBW Plate |
| Number of Vibration Motors: | 2 |
| Vibration Motor Power: | 2 x 5,5 kW |
| Manual Speed Control: | Included |
| Grill Spacing: | This can be determined based on customer requests. |
| Rotor Blade Material: | Manganese Steel (Mn16–Mn18) *Standard High-Chromium Steel (Cr22–Cr26) *Optional Martensitic Steel *Optional Martensitic Steel + Ceramic Insert *Optional Chrome-Plated Steel + Ceramic Insert *Optional Martensitic Chromium Steel *Optional |
| Pendulum Materials: | 16–18% Manganese Cast Steel *Standard |
| Protective Liner Type: | Bolted |
| Protective Lining Material: | 12%–14% Manganese Cast Steel / Hardox® 450 *Optional |
| Viewing Cover: | Included |
| Manual Lubrication System: | Included |
| Automatic Lubrication System: | Optional |
| Engine Power: | 22 kW |
| Engine Configuration: | Single-Engine |
| Shaft Configuration: | Single-Shaft |
| Body Material: | ST52 |
| Protective Primers: | Included |
| Inlet Channel Protective Lining Material: | Wear-Resistant 450 HBW Plate |
| Thickness of the Inlet Channel Protective Liner: | 8 mm |
| Braked Axle System: | Included |
| Warning and Signaling System: | Included |
| Water Tank Capacity: | 700 Liters |
Documents
×
Get a Quote Now
PRO-130, It offers solutions for sites requiring high production with a capacity of 180–250 Tons/Hour. Contact us for a configuration and quote tailored to your project.