MJK-110 WF
Semi-Mobile Jaw Crusher
Technical Information
| Production Capacity | 180–320 Tons/Hour |
| Maximum Feed Rate | 800 mm |
| Jaw Crusher Feed Opening | 1100×850 mm |
| Total Engine Power | |
| Generator *Optional | |
| Separator Belt *Optional | |
| Shipping Dimensions |
MJK-110 WF Semi-Mobile Jaw Crusher
MJK-110 WF The Semi-Mobile Jaw Crusher is designed for high-capacity primary crushing applications, with a production capacity of 180–300 Tons/Hour and a maximum feed size of 800 mm. Feeding bunker the system consisting of a vibrating feeder, a Wobbler feeder, a bypass conveyor, a jaw crusher, and a pre stock conveyor supports an efficient operation by ensuring the material is sorted prior to crushing. The rock dumped into the hopper is transferred to the Wobbler feeder via the vibrating feeder. The wobbler feeder separates the material based on its size and physical properties, helping to remove sand, clay, silt, and unwanted fine materials from the main crushing line.
The wobbler feeder is one of the system’s key components, particularly due to the pre-screening advantage it offers when handling materials with high levels of dirt, clay, and fine particles. During feeding, unwanted fine particles and contaminated components are discharged via the bypass conveyor. As a result, clean aggregate largely separated from components such as sand, clay, and silt is directed to the jaw crusher. This pre-screening process contributes to the more controlled processing of the material reaching the jaw crusher and helps regulate the material flow in the crushing line.
The rock fed into the jaw crusher is reduced in size through the primary crushing process, bringing it closer to the desired dimensions. The crushed material is transported to the stockpile area via the pre-stock conveyor and stored there. MJK-110 WF, By combining the Wobbler feeder’s pre-screening capability with high-capacity jaw crushing technology, it offers an effective solution for the crushing stage in quarries, particularly under dirty and clay laden feeding conditions.
Features
- Wide Range of Feeding Options
Feeding Bunker It can be loaded using excavators, trucks, and loaders. This allows it to adapt to job sites where different loading equipment is used. - Flexible Feeding Bunker Design
Feeding Bunker Capacity can be determined based on customer needs. This allows the facility’s supply capacity to be configured in accordance with project requirements. *Optional - Controlled Feeding System
Thanks to the manual speed control on the feeder, the amount of material fed to the jaw crusher can be adjusted according to operating conditions and production needs. - Jaw Crusher
It reduces the size of high-hardness materials during the primary crushing process.
Thanks to the hydraulically adjustable discharge opening, the size of the material exiting the crusher can be controlled according to operational needs. *Optional - Hydraulic System
Conveyor belts and Feeding Bunker The covers can be folded and unfolded using a hydraulic system. This design helps make transportation and installation faster and more convenient. *Optional - Transportation with a Single Truck Head
Thanks to its semi-mobile design, all of the facility’s equipment can be transported using a tow truck. This feature helps streamline logistics operations between different work sites. *Optional - Easy Maintenance and Lubrication
Thanks to the manual grease fitting points, periodic lubrication of moving components can be easily performed.
An automatic lubrication unit can be installed to extend maintenance intervals. *Optional - Magnetic System
The magnetic system, which can be optionally integrated into the pre-stock conveyor belt, helps separate iron and other metal parts from the product. This helps improve the cleanliness of the final product and protects downstream equipment from metal parts. - Automatic Breakpoint Setting
– Jaw Crusher Discharge Opening: The outlet opening of the jaw crusher can be adjusted manually and can be adjusted quickly and easily using the optional hydraulic adjustment system.
-Automatic Final Product Size Adjustment: The crushing gap can be automatically adjusted based on the values entered into the jaw crusher automation system. This allows for quick and precise control of the final product size. *Optional - Braked Axle System
A braked axle system is used to ensure that the semi-mobile crushing plant can be transported safely. - Low-Maintenance Platforms
Thanks to maintenance platforms that facilitate access to areas requiring maintenance, service and inspection procedures can be carried out more safely and conveniently. *Optional - Fully Automatic Automation System
The PLC-based automation system can be managed via an HMI touchscreen panel and remote tablet control. This allows for centralized monitoring of the crushing process. - Generator System
Thanks to the generator system, the facility can be powered by diesel fuel at construction sites where there is no electrical infrastructure. *Optional - Minimum Infrastructure Requirements
Thanks to its semi-mobile design, the facility requires minimal infrastructure for installation. The necessary technical information and guidance are provided during the installation process.
Technical Specifications
| Body Protection Liner: | ST52 *Standard /Wear-Resistant 450 HBW Plate *Optional |
| Protective Coating Thickness: | 10 mm |
| Standard Feed Height (15 m³): | 5250 mm |
| Optional Feed Height (30 m³): | 6000 mm |
| Optional Feed Height (35 m³): | 6000 mm |
| Feeder Width: | 1130 mm |
| Body Protection Liner: | Wear-Resistant 450 HBW Plate |
| Number of Vibration Motors: | 2 |
| Vibration Motor Power: | 2×7,5 kW |
| Manual Speed Control: | Included |
| Grill Spacing: | This can be determined based on customer requests. |
| Movable Jaw Bedding Unit Material: | G20Mn5 Cast Steel |
| Body Thickness: | 70 mm |
| Protective Coating Thickness: | 25 mm |
| Protective Liner Type: | Bolted |
| Automatic Lubrication System: | Optional |
| Braked Axle System: | Included |
| Warning and Signaling System: | Included |
×
Get a Quote Now
MJK-110 WF, Using wobbler feeder technology, it helps separate mud, clay, and unwanted fine materials via a bypass belt before they reach the crusher. Feeding Bunker, with a system consisting of a vibrating feeder, a wobbler feeder, a 1100 x 850 mm jaw crusher, and a pre-stock conveyor belt, it offers a maximum feed capacity of 800 mm and a production range of 180–300 Tons/Hour. To determine the solution best suited to your project’s material characteristics and MJK-110 WF Contact us right away to get a price quote.