MJC-60
Semi-Mobile Jaw Crusher Crushing and Screening Plant
Technical Information
| Production Capacity | 60–120 Tons/Hour |
| Maximum Feed Rate | 380 mm |
| Jaw Crusher Feed Opening | 600×400 mm |
| Vibrating Screen Size | 1300×4000 mm |
| Total Engine Power | 75 kW |
| Generator *Optional | 150 kVA |
| Separator Belt *Optional | 650 mm |
| Shipping Dimensions | Length: 19,300 mm Width: 4,500 mm Height: 4,500 mm |
MJC-60 Semi-Mobile Primary Jaw Crushing and Screening Plant
The MJC-60 Semi-Mobile Jaw Crushing and Screening Plant, with a production capacity of 60–120 tons per hour, is designed for applications where the product needs to be classified and stockpiled immediately after the crushing process. The jaw crusher, which has a maximum feed capacity of 380 mm, reduces the material received from the feed hopper and transfers it to a 1300 x 4000 mm vibrating screen. Following the crushing process, the material is separated into different fractions and directed to the appropriate stockpiling areas via discharge conveyors.
The consistent flow of material between the hopper, vibrating feeder, jaw crusher, and screen ensures an uninterrupted production process.
Features
- Uninterrupted Flow of Materials
Feeding BunkerThe material is fed in a controlled manner from the vibrating feeder to the jaw crusher. This staged feeding system helps maintain a balanced flow of material through the crushing line. - High-Performance Jaw Crusher
A jaw crusher reduces large, high-hardness materials to a smaller size during the primary crushing stage, preparing them for the subsequent screening process.
The outlet opening can be adjusted via the hydraulic system to accommodate different product sizes. *Optional - Screening and Classification
The material coming out of the jaw crusher is separated into different fractions on a vibrating screen. The screen mesh type and mesh sizes can be customized to meet customer needs based on the target end products. - Direct Stocking Feature
The products separated on the screen are transported to the storage area via conveyor belts. This ensures that the different fractions are stored in an orderly manner and kept separate from one another. - Wide Range of Feeding Options
Feeding Bunker It can be loaded using an excavator, truck, or loader. This feature allows it to adapt to different job site and loading conditions. - Bunker Capacity Based on Need
Feeding BunkerIts capacity can be determined based on customer needs. This allows the system’s power supply configuration to be tailored to the project’s requirements. *Optional - Controlled Feeder
The vibrating feeder ensures that the material in the hopper is fed into the jaw crusher at a steady rate. The feed rate can be adjusted manually according to operating conditions.
An automatic lubrication unit can be installed to extend maintenance intervals. *Optional - Hydraulic System
Conveyor belts and hopper hatches can be opened and folded using a hydraulic system. This design simplifies transportation and installation. *Optional - Front Flap
In applications where production of a single size is required, the front flap prevents the material from being transferred to the vibrating screen and instead directs it directly to the pre-stock conveyor belt. *Optional - Easy Maintenance and Lubrication
Thanks to the manual grease points, periodic lubrication of moving parts can be easily performed. An automatic lubrication unit can be installed to extend maintenance intervals. *Optional - Braked Axle System
The braked axle system ensures that the facility is transported safely and in a controlled manner. - Low-Maintenance Platforms
Thanks to maintenance platforms that facilitate access to areas requiring maintenance, service and inspection procedures can be carried out more safely and conveniently. *Optional - Fully Automatic Automation System
The PLC-based automation system can be managed via an HMI touchscreen panel and remote tablet control. This allows for centralized monitoring of the crushing and screening process. - Generator System
Thanks to the generator system, the facility can be powered by diesel fuel at construction sites where there is no electrical infrastructure. *Optional - Minimum Infrastructure Requirements
Thanks to its semi-mobile design, the facility requires minimal infrastructure for installation. The necessary technical information and guidance are provided during the installation process.
×
Get a Quote Now
MJC-60 The Semi-Mobile Jaw Crusher Crushing and Screening Plant meets your crushing and screening needs with a capacity of 60–120 Tons/Hour. Contact us today for a system and price quote tailored to your project.