MDMK-01
Secondary Impact Crusher
Technical Information
| Production Capacity | 130–200 Tons/Hour |
| Maximum Feed Rate | 450 mm |
| Vibrating Screen Size | 1400×4000 mm |
| Crusher Type | Secondary Impact Crusher |
| Total Engine Power | 197 kW |
| Separator *Optional | 650 mm |
| Shipping Dimensions | Length: 13,500 mm Width: 4,350 mm Height: 4,500 mm |
MDMK-01 Semi-Mobile Secondary Impact Crusher
MDMK-01 The Semi-Mobile Secondary Impact Crushing and Screening Plant, with a production capacity of 130–200 Tons/Hour, is designed to reduce material that has undergone primary crushing in a secondary impact crusher and then classify it. The product exiting the secondary impact crusher, which has a maximum feed capacity of 450 mm, is passed through a 1,400 x 4,000 mm vibrating screen to be separated into different fractions. Thus, the crushing and screening processes are carried out within the same mobile system.
MDMK-01 The Semi-Mobile Secondary Impact Crushing and Screening Plant offers advantages in applications where the product needs to be classified immediately after crushing. A total motor power of 197 kW supports the system’s operating capacity, while the 650 mm separator option enables the removal of unwanted components from the material. Optional 7 m³ Feeding Bunker The feed volume can be increased by selecting this option; when the front flap is used, the vibrating screen can be bypassed during the production of single-size products, allowing the material to be fed directly into the storage line.
Features
- 7 m³ Feeding Bunker
With a capacity of 7 m³ Feeding Bunker It can be selected as an option. This allows the facility to be fed not only by a conveyor belt but also by an excavator and a loader. *Optional - Wide Range of Feeding Options
Feeding bunkers can be loaded using excavators and loaders. This design provides operational flexibility in construction site and quarry applications where different loading equipment is used. - Controlled Feeding System
Thanks to the manual speed control on the feeder, the amount of material fed into the crusher can be adjusted according to operating conditions and production needs. - Hydraulic System
Conveyor belts and hopper hatches can be easily folded and unfolded using the hydraulic system. This design allows for the rapid transportation and installation of the semi-mobile crushing and screening plant without the need for a crane. *Optional - Front Flap
In applications requiring the production of a single product type, the optional front flap located in front of the screen feed belt prevents the material from being transferred to the vibrating screen, allowing the product to be directed directly to the front storage belt. *Optional - Transportation with a Single Truck Head
Thanks to its semi-mobile design, all of the facility’s equipment can be transported using a tow truck. This feature helps streamline logistics operations between different work sites. - Easy Maintenance and Lubrication
Thanks to the manual grease fitting points, periodic lubrication of moving components can be easily performed.
An automatic lubrication unit can be installed to extend maintenance intervals. *Optional - Precise Final Product Adjustment
-Secondary Impact Crusher Discharge Opening: The outlet opening of the secondary impact crusher can be adjusted manually and can be adjusted quickly and easily using the hydraulic adjustment system.
-Automatic Final Product Size Adjustment: The crushing gap can be automatically adjusted based on the values entered into the secondary impact crusher’s automation system. This allows for quick and precise control of the final product size. *Optional - Vibrating Screen
The mesh type and mesh spacing of the vibrating screen, which separates broken materials into different fractions, can be customized according to customer specifications. - Braked Axle System
A braked axle system is used to ensure that the semi-mobile crushing and screening plant can be transported safely. - Low-Maintenance Platforms
Thanks to maintenance platforms that facilitate access to areas requiring maintenance, service and inspection procedures can be carried out more safely and conveniently. *Optional - Fully Automatic Automation System
The PLC-based automation system can be managed via an HMI touchscreen panel and remote tablet control. This allows for centralized monitoring of the crushing and screening process. - Generator System
Thanks to the generator system, the facility can be powered by diesel fuel at construction sites where there is no electrical infrastructure. *Optional - Windshifter Technology
The Windshifter, which can be positioned along a long return conveyor, helps separate unwanted lightweight materials from the material on the screen using an airflow. This improves the cleanliness of the final product. *Optional - Minimum Infrastructure Requirements
Thanks to its semi-mobile design, the facility requires minimal infrastructure for installation. The necessary technical information and guidance are provided during the installation process.
×
Get a Quote Now
MDMK-01, With a capacity of 130–200 Tons/Hour, it performs the reduction and classification of material after primary crushing in a single system. Please contact us to determine the hopper, screen, and options best suited for your project.