FULLSTAR-115
Semi-Mobile Crushing Screening and Washing Plant
Technical Information
| Production Capacity | 200–300 Tons/Hour |
| Vibrating Screen Size | 1,700 x 4,500 mm – 2,200 x 5,500 mm |
| Screw Washer Dimensions | Ø800 x 8,000 mm (Double Helix) |
| Jaw Crusher Feed Opening | 1100×850 mm |
| Secondary Crusher Model | Cone Crusher |
| Maximum Feed Rate | 800 mm |
| Total Engine Power | 520 kW |
| Generator *Optional | 680 kVA |
| Separator Belt*Optional | 800 mm |
| Shipping Dimensions | 1. Chassis: Length: 22,000 mm Width: 4,700 mm Height: 4,500 mm 2. Chassis: Length: 25,000 mm Width: 4,450 mm Height: 4,500 mm |
FULLSTAR-115 Semi-Mobile Crushing Screening and Washing Plant
FULLSTAR-115 The Semi-Mobile Crushing Screening and Washing Plant, with a production capacity of 200–300 Tons/Hour, combines primary crushing, cone crushing, screening, and washing processes on two separate chassis. The first chassis, equipped with a jaw crusher capable of handling feed sizes up to 800 mm, performs the primary crushing and washing processes, while the second chassis handles the cone crushing and screening operations.
In the first chassis Feeding Bunker the rock that is fed into the jaw crusher via a vibrating feeder. The material emerging from the first crushing stage, 1700 x 4500 mm It is washed by being directed to a vibrating washing screen and classified according to particle size. The finest material obtained during screening is transferred to an Ø800 x 8000 mm Screw Washer, where it is cleaned. Products of other sizes are transported to the storage area via side conveyor belts. The coarse material remaining on the screen is sent to the cone crusher on the second frame.
In the second frame Feeding Bunker the material is fed into the cone crusher. The material, which is reduced in size in the cone crusher, 2200 x 5500 mm The material is directed to a vibrating screen and classified by size. The coarse material remaining on the screen is returned to the cone crusher for re-crushing. This closed-circuit system ensures that the material is repeatedly crushed and classified until it reaches the target sizes. While the screening process in the second stage is performed without washing, the washing process is carried out in the first stage using a wash screen and a twin-screw washer.
With a total engine power of 520 kW FULLSTAR-115, it can be configured to meet various operational needs with an optional 680 kVA generator system and an 800 mm separator. Its dual-chassis design allows the primary crushing and washing line and the cone crushing and screening line to be transported as separate units. FULLSTAR-115, is designed for the production of washed aggregate in various sizes, featuring high production capacity, a closed-circuit cone crushing system, and integrated washing equipment.
Features
- Wide Range of Feeding Options
Feeding bunkers can be loaded using excavators, trucks, and loaders. This design provides operational flexibility in construction site and quarry applications where different loading equipment is used. - Flexible Feeding Bunker Design
Feeding Bunker The capacity can be determined based on the capacity required in accordance with the machine’s current design. - Controlled Feeding System
Thanks to the manual speed control on the feeder, the amount of material fed into the crusher can be adjusted according to operating conditions and production needs. - Hydraulic System
Conveyor belts and hopper hatches can be easily folded and unfolded using the hydraulic system. This design allows for the rapid transportation and installation of the Semi-Mobile Crushing Screening and Washing Plant without the need for a crane. *Optional - Front Flap
In applications requiring the production of a single product type, the optional front flap located in front of the screen feed belt prevents the material from being transferred to the vibrating screen, allowing the product to be directed directly to the front storage belt. *Optional - Transportation with a Single Truck Head
Thanks to its semi-mobile design, all of the facility’s equipment can be transported using a tow truck. This feature helps streamline logistics operations between different work sites. - Easy Maintenance and Lubrication
Thanks to the manual grease fitting points, periodic lubrication of moving components can be easily performed.
An automatic lubrication unit can be installed to extend maintenance intervals. *Optional - Precision Final Product Adjustment
– Jaw Crusher Discharge Opening: The outlet opening of the jaw crusher can be adjusted manually and can be adjusted quickly and easily using the optional hydraulic adjustment system.
– Cone Crusher Discharge Opening: The outlet opening of the cone crusher can be adjusted manually, quickly, and easily.
– Automatic Final Product Size Adjustment: For both crushers, the crushing gap can be automatically adjusted based on the value entered through the automation system. This allows for quick and precise control of the final product size. *Optional - Vibrating Wash Screen
A vibrating wash screen not only classifies the material but also subjects it to a washing process. The washing nozzles located on each layer of the screen remove unwanted fine particles and contaminants from the material. - Screw Washer
A twin-screw washer is used to aid in the cleaning of fine material that passes through the washing screen. The screw system helps guide the fine material through the washing process, thereby improving product cleanliness. - Braked Axle System
A braked axle system is used to ensure that the Semi-Mobile Crushing Screening and Washing Plant can be transported safely. - Low-Maintenance Platforms
Thanks to maintenance platforms that facilitate access to areas requiring maintenance, service and inspection procedures can be carried out more safely and conveniently. *Optional - Fully Automatic Automation System
The PLC-based automation system can be managed via an HMI touchscreen panel and remote tablet control. This allows for centralized monitoring of the crushing, screening, and washing process. - Generator System
Thanks to the generator system, the facility can be powered by diesel fuel at construction sites where there is no electrical infrastructure. *Optional - Windshifter Technology
The Windshifter, which can be positioned along a long return conveyor, helps separate unwanted lightweight materials from the material on the screen using an airflow. This improves the cleanliness of the final product. *Optional - Minimum Infrastructure Requirements
Thanks to its semi-mobile design, the facility requires minimal infrastructure for installation. The necessary technical information and guidance are provided during the installation process.
![FTC-200-Bunker](https://faboglobal.com/wp-content/uploads/2026/08/x0054450_1.gif")
Documents
×
Get a Quote Now
You can contact us to get detailed information about all our product groups—particularly mobile crushers, screens, and crushing plants—and to determine the solution best suited for your project. Our team of expert engineers and sales professionals will provide you with the best guidance, offering options tailored to your needs in terms of capacity, performance, and investment costs. Once you fill out the form, we’ll get back to you as soon as possible with product specifications, a price quote, and project support. We’re here to support you with all our crusher and screening system solutions.