250-300 Ton/Hour Stationary Crushing, Screening and Washing Plant

We based our design on the need to process river stone and limestone, produce aggregate in various sizes, and incorporate a washing process into the production line. We determined the scope of the facility based on a capacity of 250–300 Tons/Hour and product classification requirements.

We designed the feeding, pre-screening, jaw crushing, cone crushing, and vertical shaft crushing sections as an integrated system. By incorporating the washing, final screening, and storage equipment into this layout, we established the plant’s layout and material handling lines.

We located the 30 m³ feeder bunker and the vibrating pre-screen at the beginning of the plant. The coarse material directed to the primary crusher after pre-screening CLK-110 We set up a system where the material will be crushed in a jaw crusher.

We incorporated a three-stage washing screen and a washing auger into the production line. By screening and washing the material directed to the washing station, we created a section where fine products will be prepared prior to storage.

The cone crusher and VSI-900 We positioned the vertical shaft crusher so that it would be used in the subsequent crushing stages of the production line. Two 20 m³ Feeding BunkerWe set up a temporary storage and feeding system for the materials directed to these sections

We designed a system in which material processed by three- and four-deck vibrating screens is sorted according to particle size. We completed the line so that the aggregates, sorted by transfer and storage conveyors, are transported to the appropriate storage areas.